Skip to main content
AgloMixer
Recosolution
Recosolution
Manufacturer of Recycling Machinery...
─────  AgloMixer

Densifying & Conditioning
​Soft Plastic

It is designed to densify and condition soft plastics such as LDPE, LLDPE, HM, PP films, raffia, woven bags, foams, and other thin plastic waste that cannot be directly fed into an extruder.

How the AgloMixer Works

A high-efficiency material conditioning system designed to densify suitable plastic waste into a more processable form for downstream extrusion and recycling.

From Plastic Waste to Densified Flakes

Where the Conditioned Material Goes Next

The densified flakes are fed into an extruder to create various each products.

Material It Can Process

Plastic Film

LDPE, LLDPE, HM, PP

Flexible Plastic

Raffia, woven bags, flexible 

packaging

Foams

EPS, EPE, foam scrap

Other Compatible Material

Thin plastic waste

(according to suitability)

AgloMixer Models & Capacity

Choose the right model based on your production needs.

 Model No. Size & HP
Capacity (kg/hr) 
LD
Capacity (kg/hr) 
HM/HD/PP/MLP
 10.0 AgloMix022 & 10  4025 
  25.0 AgloMix 024 &  25 10060 
  40.0 AgloMix 026 & 40  100 60
40.1 AgloMix 028 & 40 10060  
50.0 AgloMix 030 & 50  200130
60.0 AgloMix  032 & 60 220150
75.0 AgloMix036 & 75 280180

Technical Specifications

Reliable Performance. Build for industrial use.

Specification ParameterValue
Machine NameAglomixer
TypeHigh-Friction Densifier & Thermal Conditioner
Primary FunctionDensifying Soft Plastics & Thermal Moisture Removal
Compatible MaterialsLDPE, LLDPE, HM-HDPE, PP Films, Woven Bags & Foams
 Motor Power Options40 HP / 60 HP / 100 HP / 150 HP
Capacity Range100 to 900 Kg/hr
 Residual Output MoistureVia Friction Flash-Evaporation
 Operation DutyContinuous Industrial 24/7
Power Supply Requirement
3-Phase, 415V, 50Hz
Compliance CertificationCE Certified 

AgloMixer in Action

See the AgloMixer in real-world settings - from operation to the output it delivers.

Frequently Asked Questions

The AlgoMixer densifies and conditions lightweight soft plastic waste, making the material easier to handle and feed into downstream extrusion processes.

It is designed for suitable soft plastics, including LDPE, LLDPE, HM, PP films, raffia, woven bags, foams and other compatible thin plastic waste. Material suitability depends on its composition and condition.

The output consists of densified, conditioned plastic flakes or agglomerated pieces. This intermediate material can be used in suitable downstream extrusion processes.

Lightweight plastic films and bags can be difficult to feed consistently. Densification increases bulk density and can improve material handling and feeding.

Its primary purpose is conditioning and densification rather than producing a fully melted plastic stream. The material is prepared for further processing.

Suitable MLP materials may be processed depending on their composition and machine configuration. A material trial is recommended to confirm suitability.

The conditioning process can help reduce moisture under suitable operating conditions. The required moisture level should be verified for the specific material and downstream process.

Capacity depends on the selected model, plastic type, bulk density, feed condition and operating parameters.

Yes. The conditioned material can be directed into a compatible extrusion line for products such as plastic lumber, granules or molded blocks, depending on the downstream equipment and process.

Consider your plastic type, available feedstock, required hourly throughput and intended downstream product. These details help determine the appropriate model.

Ready to Process Your Plastic?

Tell us about your material and production requirements, and our team will help you find the right solution.

Request a Quote →